Моторное масло TAMASHI
Commercial and hevy-duty
vehicles engine oil
20L. ID: 10W40T320
205L. ID: 10W40T320B


Mack EO-O Premium Plus, EOS-4.5
MTU Oil Category 3.1
Deutz DQC IV-10LA
CAT ECF-3
Cummins CES 20 081
DAF Euro V and Euro VI requirements
Packaging:
Specifications:
ACEA E6/E7/E9
API CJ-4
JASO DH-2
MB-Approval 228.51
MAN M 3477
Volvo VDS-4.5
Renault Trucks RLD-3


This oil can be used in all engines that meet the Euro-4, Euro-5 and Euro-6 requirements where vehicle manufacturers require current level oil characteristics.
A balanced formula of base oils and a high-tech additive package ensure engine parts wear resistance, prevent sediments accumulation on pistons and other thermo-stressed parts, as well as oxidation and sludging throughout the entire oil usage period prescribed by the engine manufacturer.
TAMASHI T Power DIESEL ULTRA E6/E9 SAE 10W-40 — synthetic motor oil is a premium oil for modern heavy-duty diesel engines.
The unique oil composition significantly increases the service interval. Its components meet the world’s leading car manufacturers' requirements.

TAMASHI T Power DIESEL ULTRA E6/E9 SAE 10W-40

Synthetic motor oil
Parameters
Method
Value
Density at 15 °C, g/cm3
Kinematic viscosity at 100°C, mm2/s
Kinematic viscosity at 40 °C, mm2/s
Cranking viscosity at -30°C, MPa*s
Viscosity index
Total base number, mg KOH/g
Flash point, °C
Pour point, °C
Sulphated ash, %
ASTM D4052
ASTM D445
ASTM D445
ASTM D2270
ASTM D5293
ASTM D2896
ASTM D92
ASTM D92
GOST 12417
14,9
0,86
94,6
165
5690
10,6
234
-39
1
GOST 12417
ASTM D92
ASTM D92
ASTM D2896
ASTM D5293
ASTM D2270
ASTM D445
ASTM D445
ASTM D4052
Sulphated ash, %
Pour point, °C
Flash point, °C
Total base number, mg KOH/g
Viscosity index
Cranking viscosity at -30°C, MPa*s
Kinematic viscosity at 40 °C, mm2/s
Kinematic viscosity at 100°C, mm2/s
Density at 15 °C, g/cm3
Value
Method
Parameters
14,9
0,86
94,6
165
5690
10,6
234
-39
1
Assistance in the selection of oil for your car