Commercial and hevy-duty
vehicles engine oil
20L. ID: 10W40T220
205L. ID: 10W40T220B
205L. ID: 10W40T220B
Renault Trucks RXD/RLD-2
Mack EO-N
MTU Type 3
Deutz DQC III-10
Cummins CES 20072
DAF Extended Drain
Mack EO-N
MTU Type 3
Deutz DQC III-10
Cummins CES 20072
DAF Extended Drain
Packaging:
Specifications:
ACEA E4 / E7
API CI-4 / SL
MB Approval 228.5
MAN 3277
Scania LDF-2
Volvo VDS-3
API CI-4 / SL
MB Approval 228.5
MAN 3277
Scania LDF-2
Volvo VDS-3
This oil can be used in all engines not equipped with diesel particulate filters (DPF) that meet the Euro-4 and Euro-5 requirements.
A balanced formula of base oils and a high-tech additive package ensure engine parts wear resistance, prevent sediments accumulation on pistons and other thermo-stressed parts, as well as oxidation and sludging throughout the entire oil usage period prescribed by the engine manufacturer.
TAMASHI T Power DIESEL ULTRA E4/E7 SAE 10W-40 — synthetic motor oil is a premium oil for modern heavy-duty diesel engines.
The unique oil composition significantly increases the service interval. Its components meet the world’s leading car manufacturers' requirements.
TAMASHI T Power DIESEL ULTR E4/E7 SAE 10W-40
Synthetic motor oil
Parameters
Method
Value
Density at 15 °C, g/cm3
Kinematic viscosity at 100°C, mm2/s
Kinematic viscosity at 40 °C, mm2/s
Cranking viscosity at -30°C, MPa*s
Viscosity index
Total base number, mg KOH/g
Flash point, °C
Pour point, °C
Sulphated ash, %
ASTM D4052
ASTM D445
ASTM D445
ASTM D2270
ASTM D5293
ASTM D2896
ASTM D92
ASTM D97
GOST 12417
14,8
0,865
93,9
165
5230
15,6
236
- 42
1,8
GOST 12417
ASTM D97
ASTM D92
ASTM D2896
ASTM D5293
ASTM D2270
ASTM D445
ASTM D445
ASTM D4052
Sulphated ash, %
Pour point, °C
Flash point, °C
Total base number, mg KOH/g
Viscosity index
Cranking viscosity at -30°C, MPa*s
Kinematic viscosity at 40 °C, mm2/s
Kinematic viscosity at 100°C, mm2/s
Density at 15 °C, g/cm3
Value
Method
Parameters
14,8
0,865
93,9
165
5230
15,6
236
- 42
1,8
