Passenger cars and light commercial
vehicles engine oil
1L. ID: 5W40T071
4L. ID: 5W40T074
60L. ID: 5W40T0760
205L. ID: 5W40T07B
4L. ID: 5W40T074
60L. ID: 5W40T0760
205L. ID: 5W40T07B
BMW LL04
VW 511.00/505.01
VW 511.00/505.01
Packaging:
Specifications:
API SP
ACEA C3
GM Dexos2
MB 229.51/229.52
ACEA C3
GM Dexos2
MB 229.51/229.52
It effectively protects the engine from low speed pre-ignition (LSPI) and prevents wear-out of the timing chain.
A mixture of highly refined synthetic bases and a modern additive package ensures maximum protection of the engine, especially in thermally loaded areas, and provides easy engine start at low temperatures. Low ash content extends the life of particulate filters and catalytic converters.
For use in gasoline and diesel engines of passenger and commercial vehicles, including those with turbocharging, direct fuel injection and exhaust gas aftertreatment systems with ACEA C3 approval in 5W-40 viscosity.
TAMASHI SAE 5W-40 API SP, ACEA C3 – fully synthetic engine oil.
TAMASHI SAE 5W-40 API SP, ACEA C3
Synthetic motor oil
LSPI
LOW
ASH
ASH
VW
511
511
GM
Dexos2
Dexos2
PAO
Parameters
Method
Value
Density at 15 °C, g/cm3
Kinematic viscosity at 100°C, mm2/s
Kinematic viscosity at 40 °C, mm2/s
Cranking viscosity at -30°C, MPa*s
Viscosity index
Total base number, mg KOH/g
NOACK, %
Flash point, °C
Pour point, °C
ASTM D4052
ASTM D445
ASTM D445
ASTM D2270
ASTM D5293
ASTM D2896
ASTM D5800
ASTM D92
ASTM D97
14,1
0,852
84,3
173
5830
8,6
8
236
- 43
Phosphorus, %
Sulfur, %
Sulphated ash, %
ASTM D4951
ASTM D4294
GOST 12417
0,08
0,21
0,75
- 43
236
8
8,6
5830
173
84,3
0,852
14,1
ASTM D97
ASTM D92
ASTM D5800
ASTM D2896
ASTM D5293
ASTM D2270
ASTM D445
ASTM D445
ASTM D4052
Pour point, °C
Flash point, °C
NOACK, %
Total base number, mg KOH/g
Viscosity index
Cranking viscosity at -30°C, MPa*s
Kinematic viscosity at 40 °C, mm2/s
Kinematic viscosity at 100°C, mm2/s
Density at 15 °C, g/cm3
Value
Method
Parameters
Phosphorus, %
Sulfur, %
Sulphated ash, %
ASTM D4951
ASTM D4294
GOST 12417
0,08
0,21
0,75
