Моторное масло TAMASHI
Моторное масло TAMASHI
Passenger cars and light commercial
vehicles engine oil
1L. ID: 5W30T041
4L. ID: 5W30T044
205L. ID: 5W30T04B




BMW Longlife-01
VW 502.00/505.00
RN 0700/0710
OPEL A/B
Packaging
Specifications
API SL/CF
ACEA A3/B3
ACEA A3/B4-16
MB 229.5
It is recommended for use in Mercedes-Benz, BMW, Volkswagen Group cars where oil is required according to the specification MB 229.5, LL-01, VW 502.00/505.00
It is intended for use in high-powered gasoline and diesel engines of light motor vehicles and lightweight trucks, where lubricants of ACEA A3/B4 or API SL (or earlier specifications) operational class and the SAE 5W-30 corresponding viscosity grade are recommended.
Produced from modern high-quality synthetic base oils and a highly effective multifunctional additives package.
TAMASHI SAE 5W-30 API SL/CF, ACEA A3/B4−16 — fully synthetic motor oil

TAMASHI SAE 5W-30 API SL/CF, ACEA A3/B4-16

Synthetic motor oil
PAO
MB
229,5
MoDTC
AN
Parameters
Method
Value
Density at 15 °C, g/cm3
Kinematic viscosity at 100°C, mm2/s
Kinematic viscosity at 40 °C, mm2/s
Cranking viscosity at -30°C, MPa*s
Viscosity index
Total base number, mg KOH/g
NOACK, %
Flash point, °C
Pour point, °C
ASTM D4052
ASTM D445
ASTM D445
ASTM D2270
ASTM D5293
ASTM D2896
ASTM D5800
ASTM D92
ASTM D97
11,94
0,8492
69,24
170
4690
10,24
8,3
246
- 43
Phosphorus, %
Sulfur, %
Sulphated ash, %
ASTM D4951
ASTM D4294
GOST 12417
0,08
0,2
1,09
- 43
246
8,3
10,24
4690
170
69,24
0,8492
11,94
ASTM D97
ASTM D92
ASTM D5800
ASTM D2896
ASTM D5293
ASTM D2270
ASTM D445
ASTM D445
ASTM D4052
Pour point, °C
Flash point, °C
NOACK, %
Total base number, mg KOH/g
Viscosity index
Cranking viscosity at -30°C, MPa*s
Kinematic viscosity at 40 °C, mm2/s
Kinematic viscosity at 100°C, mm2/s
Density at 15 °C, g/cm3
Value
Method
Parameters
Phosphorus, %
Sulfur, %
Sulphated ash, %
ASTM D4951
ASTM D4294
GOST 12417
0,08
0,2
1,09
Assistance in the selection of oil for your car