Моторное масло TAMASHI
Моторное масло TAMASHI
Passenger cars and light commercial
vehicles engine oil
1L. ID: 0W30T091
4L. ID: 0W30T094
BMW LL-04
Porsche C30
GM Dexos 2
Renault RN 0700/0710
Packaging:
Specifications:
API SP,
ACEA C2/C3
VW 504.00/507.00
MB 229.51/229.52
Recommended for application for the following brans vehicles: Volkswagen Group, Mercedes-Benz, BMW, GM and others where the following specifications are needed ACEA C2, C3, VW 504.00/507.00, MB 229.51/229.52, BMW LL-04, Porsche C30, Dexos 2, Renault RN 0700/0710.
Provides protection against Low-Speed Pre-Ignition (LSPI) and prevents timing chain wear-out. A mixture of highly refined synthetic bases and a modern additive package ensures maximum protection of the engine, especially in thermally loaded areas, and provides easy engine start at low temperatures. Low ash content extends the life of particulate filters and catalytic converters.
Is a fully synthetic engine oil designed for gasoline and diesel engines, including engines with turbocharging, direct fuel injection and exhaust gas cleaning systems equipped.
TAMASHI SAE 0W-30 API SP, ACEA C3 – synthetic engine oil.
MB
229.51
VW
504/507
LOW
ASH
LSPI

TAMASHI SAE 0W-30 API SP, ACEA C3

Synthetic engine oil
Parameters
Method
Value
Density at 15°C, g/cm3
Kinematic viscosity at 100°C, mm2/s
Kinematic viscosity at 40°C, mm2/s
CCS dynamic viscosity at minus 30°C, mPa*s
Viscosity index
Alkaline number, mg KOH/g
NOACK evaporability, %
Flash point, °C
Solidification temperature, °C
ASTM D4052
ASTM D445
ASTM D445
ASTM D2270
ASTM D5293
ASTM D2896
ASTM D5800
ASTM D92
ASTM D97
11,9
0,835
68,6
171
5540
8,3
9,7
233
- 45
Mass fraction of sulfate ash, %
GOST 12417
0,8
68,6
0,835
11,9
ASTM D97
ASTM D92
ASTM D5800
ASTM D2896
ASTM D5293
ASTM D2270
ASTM D445
ASTM D445
ASTM D4052
Solidification temperature, °C
Flash point, °C
NOACK evaporability, %
Alkaline number, mg KOH/g
Viscosity index
CCS dynamic viscosity at minus 30°C, mPa*s
Kinematic viscosity at 40°C, mm2/s
Kinematic viscosity at 100°C, mm2/s
Density at 15°C, g/cm3
Value
Method
Parameters
171
5540
8,3
9,7
233
- 45
Mass fraction of sulfate ash, %
GOST 12417
0,8
Assistance in the selection of oil for your car