TAMASHI SAE 0W-20 API SP, ACEA C5
»
»
»
TAMASHI SAE 0W-20 API SP, ACEA C5
Synthetic engine oil
Recommended for use in vehicles with installed particulate filters (exhaust gas aftertreatment systems).
Protection against premature ignition at low speeds.
Extra easy starting in winter.
TAMASHI SAE 0W-20 API SP, ACEA C5
Synthetic engine oil
Recommended for use in vehicles with installed particulate filters (exhaust gas aftertreatment systems).
Protection against premature ignition at low speeds.
Extra easy starting in winter.
TAMASHI SAE 0W-20 API SP, ACEA C5
Synthetic engine oil
Recommended for use in vehicles with installed particulate filters (exhaust gas aftertreatment systems).
Protection against premature ignition at low speeds.
Extra easy starting in winter.
TAMASHI SAE 0W-20 API SP, ACEA C5
Synthetic engine oil
Recommended for use in vehicles with installed particulate filters (exhaust gas aftertreatment systems).
Protection against premature ignition at low speeds.
Extra easy starting in winter.
Recommended for application for the following brans vehicles: Volkswagen Group, Volvo, Mercedes-Benz, Geely, Chery, Haval, Jetour and others where the following specifications are needed ACEA C5, VW 508.00/509.00, MB 229.71, VCC RBS0−2AE, Porsche C20.
Description:
TAMASHI SAE 0W-20 API SP, ACEA C5 – synthetic engine oil.
Is a fully synthetic engine oil designed for gasoline and diesel engines, including engines with turbocharging, direct fuel injection and exhaust gas cleaning systems equipped.
Provides protection against Low-Speed Pre-Ignition (LSPI) and prevents timing chain wear-out. A mixture of highly refined synthetic bases and a modern additive package ensures maximum protection of the engine, especially in thermally loaded areas, and provides easy engine start at low temperatures. Low ash content extends the life of particulate filters and catalytic converters.
Packaging:
205L
60L
1L
4L
Specifications:
Recommendations:
API SP,
ACEA C5
VCC RBS0-2AE
VW 508.00/509.00
MB 229.71
Porsche C20
4L –
60L –
205L –
1L –
ID:
0W20T081
0W20T084
0W20T0860
0W20T08B
Parameters
Method
Value
Density at 15°C, g/cm3
Kinematic viscosity at 100°C, mm2/s
Kinematic viscosity at 40°C, mm2/s
CCS dynamic viscosity at minus 30°C, mPa*s
Viscosity index
Alkaline number, mg KOH/g
NOACK evaporability, %
Flash point, °C
Solidification temperature, °C
ASTM D4052
ASTM D445
ASTM D445
ASTM D2270
ASTM D5293
ASTM D2896
ASTM D5800
ASTM D92
ASTM D97
8,7
0,841
47
166
5800
8,7
9,9
225
- 45
Mass fraction of sulfate ash, %
GOST 12417
0,8
Physicochemical properties:
More details
For any questions about our product, you can get advice